Crown Vintage
Rolex Submariner 16800 'Pallettoni' 40MM 1982
Rolex Submariner 16800 'Pallettoni' 40MM 1982
Couldn't load pickup availability
Rolex Submariner 16800 'Pallettoni' 40MM 1982
This 1982 Submariner 16800 comes from the short transitional window when Rolex paired its new sapphire crystal, 300 metre depth rating and quickset calibre 3035 with the matte “Pallettoni” dial. The dial takes its name from its oversized lume plots.
The 40mm Oyster case is in excellent condition, with very little visible wear. The lugs keep sharp edges and their full thickness, and the brushed and polished surfaces still contrast as they did originally. Both point to little or no polishing in four decades. The bracelet matches the case, with only light marks from careful ownership.
The matte black dial is in excellent condition. The printing is crisp, and the oversized lume plots are intact and have aged evenly. The hands are just as well preserved and sit in harmony with the dial. Overall, this is an honest and excellent example of the first sapphire-crystal Submariner Date, the reference that bridged Rolex’s vintage and modern eras.
Witschi WAIO Report:
Tested over 4 positions the watch is running @ +1.4s/d | 0.3MS Beat Error | 245 Degrees of amplitude
Watch has successfully passed a 5BAR Pressure test.
Share
Why we love this watch
Why we love this watch
Matte Dial, Sapphire Crystal: The 1982 Rolex Submariner 16800 'Pallettoni'
Beneath the sapphire crystal of this 1982 Submariner, a calibre 3035 beats at 28,800 vibrations per hour, while the dial above it still wears the flat matte black and fat painted lume plots of the acrylic-era watch it replaced.
That contradiction is the whole story of reference 16800. Rolex rebuilt the Submariner Date almost from the ground up at the turn of the 1980s, yet for the first few years of production it kept the dial that had defined the model through the 1970s. The result is a 40mm dive watch standing with one foot in each era, and the Italian nickname 'Pallettoni', a nod to its oversized lume plots, has stayed with these early dials ever since.
From Basel 1954 to the First Submariner Date
The Rolex Submariner went into production in 1953 and was presented to the public at the Basel Watch Fair in 1954 as reference 6204. Through the 1960s and 1970s the line evolved through references 5512 and 5513, and then the 1680, the first Submariner to show the date, complete with a Cyclops magnifier over the window at 3 o'clock. The 1680 was rated to 200 metres, wore a domed Plexiglas crystal and ran on the calibre 1575. It was a capable tool watch, but by the late 1970s its acrylic crystal and slower-beating movement belonged to an older generation.
1979: One Extra Zero, an Entirely New Submariner Date
Rolex's answer arrived in 1979 with the modest addition of a zero to the reference number, turning the 1680 into the 16800. The new number understated the change. The 16800 was the first Submariner fitted with a scratch-resistant sapphire crystal, and its depth rating rose from 200 to 300 metres, the figure the Submariner still carries today. The 40mm Oyster case, crown guards and Mercedes handset remained, so at arm's length the watch looked familiar. Up close and under the caseback, almost everything that mattered had moved forward.
The Calibre 3035 and the Quickset Date
Inside, the calibre 1575 gave way to the calibre 3035, a self-winding 27 jewel movement. It beat at 28,800 vibrations per hour against the 19,800 of its predecessor, which brought a smoother sweep and finer regulation potential. More practically, it brought a quickset date to the Submariner for the first time. Setting the calendar no longer meant winding the hands around the dial day by day, a small change that made the 16800 a far easier watch to live with.
A Ratcheting, Unidirectional Bezel
The 16800 was also the first Submariner to receive a ratcheting, unidirectional rotating bezel. Earlier Submariner bezels turned in both directions on friction. The new design could only turn anticlockwise and clicked into place, so an accidental knock during a dive could shorten the remaining time shown, never extend it. It was a genuine safety improvement, and the principle has carried through every Submariner since.
The Pallettoni Dial: Vintage Face, Modern Watch
For all that new engineering, Rolex fitted the early 16800 with a matte black dial and painted tritium hour markers. The printing reflected the new 300 metre rating, yet the overall look sat far closer to the 1680 than to anything Rolex fitted to the Submariner Date afterwards. The 'Pallettoni' name describes exactly that: large, painted tritium plots set directly on the matte surface with no metal surrounds.
Matte production ran from the reference's launch until around 1984, when Rolex moved the 16800 to a glossy black dial with applied hour markers framed in white gold. That later layout became the template for the modern Submariner, so the matte dial marks the end of one design language as clearly as the sapphire crystal marks the start of another. A 1982 example such as ours sits squarely within that short matte window.
The Road to the 16610
The 16800 itself was succeeded in the late 1980s by the 16610, which kept the 40mm case, sapphire crystal and 300 metre rating but adopted the calibre 3135, a movement that powered the Submariner Date for the next two decades. In hindsight, almost every element of the 16610 had already been introduced by the 16800. What the later watch did not inherit was the matte dial, which makes the early 16800 the last Submariner Date to pair Rolex's modern hardware with the face of its predecessors.
Final Thoughts
The 16800 'Pallettoni' captures the moment Rolex modernised the Submariner Date without yet changing its face. Sapphire, 300 metres, a high-beat quickset calibre and a ratcheting bezel set out the template that Submariners still follow. The matte dial and painted plots, meanwhile, tie this 1982 watch to the acrylic Submariners of the 1960s and 1970s. It is a transition you can read at a glance, and that honesty is exactly why we love it.
Case & Bracelet
Case & Bracelet
- Case & Bracelet in excellent condition, very little wear visible.
- Case & Bracelet condition indicates little to no polishing
Dial & Hands
Dial & Hands
- Dial & hands in excellent condition
Warranty & Condition
Warranty & Condition
Crown Vintage Watches provides a minimum 6-month mechanical warranty on pre-owned watches, from the date of purchase.
The warranty covers mechanical defects only.
The warranty does not cover damages such as scratches, finish, crystals, glass, straps (leather, fabric or rubber damage due to wear and tear), damage resulting from wear under conditions exceeding the watch manufacturer’s water resistance limitations, and damage due to physical and or accidental abuse.
Please note, water resistance is neither tested nor guaranteed.
Shipping and insurance costs for warranty returns to us must be covered by the customer. Returns must be shipped via traceable courier. Return shipment must be pre-paid and fully insured. Collect shipping will be refused. In case of loss or damages, the customer is liable.
Our Pledge
At Crown Vintage Watches, we stand by the authenticity of every product we sell. For added peace of mind, customers are welcome to have items independently authenticated at their own expense.
Condition
Due to the nature of vintage timepieces, all watches are sold as is. We will accurately describe the current condition and working order of all watches we sell to the best of our ability.
Shipping & Refund
Shipping & Refund
